Safe Driving

Find Vehicle Size - Find your size on your tire

A tire’s sidewall is simply the outer and inner “walls” on the sides of a tire. Every sidewall has its own unique information that is divided into three main sections:

1. Tire Specs

This describes the fundamental characteristics of your tire. Size, construction, speed rating, and more.

  • Tire Type

    This designates the type of vehicle the tire fits. P is for passenger metric. Other letters are LT (light truck), T (temporary spare) and ST (special trailers). If your tire has no letter, this signifies a Euro “metric” size. P-metric and Euro-metric tires in the same size are equivalent in their dimensions but may have slight differences in load capacity and inflation pressure recommendations.

  • Tire Width

    Also called Section Width, this is the width of the tire (or thickness) in millimetres, if measured from a tire’s widest point of its outer sidewall to the widest point of its inner sidewall. Why millimetres? It originated in Europe, which uses the metric system.

  • Aspect Ratio

    This identifies the tire’s aspect ratio, which is the relationship of the tire’s sidewall height to the tire’s width. In this example, the sidewall height of the tire is 55% of its width. The lower the ratio, the smaller the sidewall height, which means better cornering, but a rougher ride.

  • Construction

    This is the tire’s internal construction, which is “radial.” Almost every tire on the road has radial construction, which means the cords of the carcass plies inside the tire “radiate” directly across from one side of the tire to the other. Other letters used are D, for diagonal construction, and B, for belted.

  • Wheel Diameter

    This number (in inches) indicates that the tire is designed to fit on a wheel with an 18-inch diameter.

  • Load Index

    This indicates how much weight the tire is certified to carry at maximum safe inflation. It doesn’t mean 97 pounds, because it’s actually an assigned value that corresponds with its “actual” load capacity found on a load index chart. If you look up 97 on the chart, you’ll find 1,609 pounds.

  • Speed Rating

    This indicates the maximum safe speed at which a tire is certified to carry a load under specified conditions. Speed ratings range from A (lowest) to Y (highest), with one exception: H falls between U and V. Exceeding the lawful speed limit is neither recommended or endorsed.

P 255 / 55 R 18 97 T
  • Tire Type (P)

    This designates the type of vehicle the tire fits. P is for passenger metric. Other letters are LT (light truck), T (temporary spare) and ST (special trailers). If your tire has no letter, this signifies a Euro “metric” size. P-metric and Euro-metric tires in the same size are equivalent in their dimensions but may have slight differences in load capacity and inflation pressure recommendations.

  • Tire Width (255)

    Also called Section Width, this is the width of the tire (or thickness) in millimetres, if measured from a tire’s widest point of its outer sidewall to the widest point of its inner sidewall. Why millimetres? It originated in Europe, which uses the metric system.

  • Aspect Ratio (55)

    This identifies the tire’s aspect ratio, which is the relationship of the tire’s sidewall height to the tire’s width. In this example, the sidewall height of the tire is 55% of its width. The lower the ratio, the smaller the sidewall height, which means better cornering, but a rougher ride.

  • Construction (R)

    This is the tire’s internal construction, which is “radial.” Almost every tire on the road has radial construction, which means the cords of the carcass plies inside the tire “radiate” directly across from one side of the tire to the other. Other letters used are D, for diagonal construction, and B, for belted.

  • Wheel Diameter (18)

    This number (in inches) indicates that the tire is designed to fit on a wheel with an 18-inch diameter.

  • Load Index (97)

    This indicates how much weight the tire is certified to carry at maximum safe inflation. It doesn’t mean 97 pounds, because it’s actually an assigned value that corresponds with its “actual” load capacity found on a load index chart. If you look up 97 on the chart, you’ll find 1,609 pounds.

  • Speed Rating (T)

    This indicates the maximum safe speed at which a tire is certified to carry a load under specified conditions. Speed ratings range from A (lowest) to Y (highest), with one exception: H falls between U and V. Exceeding the lawful speed limit is neither recommended or endorsed.

2. Department of Transportation Safety Code

This assures that your tire complies with all Department of Transportation (DOT) safety standards. After the DOT insignia is your tire’s identification number, which begins with the tire’s manufacturer and plant code where the tire was manufactured (two numbers or letters). The ninth and tenth characters tell the week the tire was manufactured. The final number(s) signifies the year the tire was manufactured.

  • DOT

    Department of Transportation Safety Code

  • B9

    Tire's manufacturer and plant code

  • YR

    Denotes tire size

  • UJNX

    Optional characters that identify brand and other significant characteristics of the tire

  • 50

    Denotes week the tire was produced

  • 08

    Denotes year the tire was manufactured

DOT B9 YR UJNX 50 08
  • DOT

    Department of Transportation Safety Code

  • B9

    Tire's manufacturer and plant code

  • YR

    Denotes tire size

  • UJNX

    Optional characters that identify brand and other significant characteristics of the tire

  • 50

    Denotes week the tire was produced

  • 08

    Denotes year the tire was manufactured

3. UTQG code

The Uniform Tire Quality Grading (UTQG) was established by the National Highway Traffic Safety Administration (NHTSA) to test tires following government-prescribed test methods and then grade each tire on three main components:

  • Treadwear: This is the wear rate of the tire, comparable only to other tires within a tire manufacturer’s line. The baseline grade is 100. Therefore a tire with 200 would theoretically last twice as long on the government’s course compared to a tire with 100.
  • Traction: Traction grades are AA, A, B and C (with AA being the highest grade). They represent the tire’s ability to stop straight on wet pavement as measured on a specified government track. Any tire rated under C is considered unacceptable for road travel.
  • Temperature:The temperature grades, from highest to lowest, are A, B and C. These represent the tire’s ability to dissipate heat under controlled indoor test conditions. Any tire rated below C is considered unacceptable.
4. Icons

Some tires have unique benefits, as showcased with specific icons.
The letters M and S (M+S) indicate that the tire meets the Rubber Manufacturers Association’s standards for a mud and snow tire. The letters can be found in the following combinations: M+S, M/S and M&S. All-season tires carry this mark.

Find your tire size in your vehicle owner’s manual or on your door

  • Find the information in your vehicle owner’s manual in the glove compartment or on the tire information sticker on your driver’s side door.
  • Usually those elements contain all the information related to your tire size and specifications as well as the appropriate tire pressure.

See the “Find your tire size on your tire” tab for a full description of the numbers and letters.

What are OE tires?

OE stands for “Original Equipment”, meaning that the tires were approved by your vehicle manufacturer to come standard on your vehicle.

Some vehicle manufacturers, such as Audi, BMW, Mercedes, and others, equip their vehicles with tires that are specifically made for their brand. These tires have a special OE marking on the sidewall. In this case, Michelin recommends to replace tires on your vehicle only with tires equipped with necessary OE marking. Table of OE markings by vehicle brand :

  • = BMW, Mini
  • MO = Mercedes
  • AO = Audi
  • VO = Volkswagen
  • N0, N1, N2, N3, N4 = Porsche
  • MO1 = AMG
  • RO1 = QUATTRO